Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 1982 >> S15 Pickup 2.8L Eng VIN B, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Auxiliary Emission Control Systems >> Computer Command Control >> Diagnosis & Testing >> Recalling Trouble Codes >> Exiting Diagnostic Mode

Exiting Diagnostic Mode

To exit diagnostic mode, turn ignition off and remove jumper wire from ALDL connector.

NOTE: The terms "enter diagnostics" and "exit diagnostics" will be used periodically throughout this section. Follow appropriate procedure for entering and exiting diagnostic mode when instructed to do so.
scientia non olet · About Mike's Workshop Manuals