Pinpoint Test CQ: P1A10
- NOTE: The Inverter System Controller (ISC) is referred to as the SOBDMC (Secondary On-Board Diagnostic Control Module C) in the scan tool.
Normal Operation and Fault Conditions
REFER to: Electric Powertrain Control - System Operation and Component Description .
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition SOBDMC P1A10:00 Hybrid Powertrain Control Module - Battery Disabled: No Sub Type Information This DTC sets when a BECM concern is detected. Possible Causes
- BECM concern
- CQ1 CHECK FOR BECM (BATTERY ENERGY CONTROL MODULE) DIAGNOSTIC TROUBLE CODES (DTCS)
- Using a diagnostic scan tool, read the CMDTC s from the BECM.
Are any BECMDTC s present?
Yes DIAGNOSE the BECMDTC s. REFER to: DIAGNOSTIC TROUBLE CODE (DTC) CHART . No The system is operating correctly at this time. The DTC may have set due to high network traffic or an intermittent fault condition. CLEAR the Inverter System Controller (ISC) DTC s and REPEAT the self-test.