Driver Power Seat - With Memory

The power driver seat is controlled by the DSM located on the driver front seat track. PMI is required when a new DSM is installed. The DSM hard/soft stops must be set/reset any time a new DSM, driver front seat track or driver front seat backrest is installed.

The memory system allows automatic positioning of the driver seat to 1 of 3 programmable positions. information on programming memory positions or recalling a stored memory position, refer to the Owner's Literature.

The driver memory seat is equipped with the following motors:

• Cushion tilt motor (serviced with front seat track)
• Height motor (serviced with front seat track)
• Horizontal motor (serviced separately from the front seat track)
• Recliner motor (serviced with front seat backrest)
• Lumbar motor (serviced with front seat power lumbar assembly)