Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2024 >> Edge ST-Line >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Charging And Controls - 2.0L ECOBOOST (184KW/250PS) - Mi4 >> Removal And Installation >> High-Pressure Fuel Pump Drive Unit >> Installation

High-Pressure Fuel Pump Drive Unit: Installation

  1. Make sure that the mating faces are clean and free of corrosion and foreign material. Install the high-pressure fuel pump drive unit, then install and tighten the high-pressure fuel pump drive unit bolts.

    Torque: 11.0 Nm

    GFD812765Courtesy of FORD MOTOR COMPANY
  2. Install the valve cover. Refer to: VALVE COVER .
scientia non olet · About Mike's Workshop Manuals