Pinpoint Test K: P166A
- Normal Operation and Fault Conditions
REFER to: Module Controlled Functions - Component Location . .
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition PCM P166A:00 Restraints Deployment Communication Circuit: No Sub Type Information This DTC sets when the PCM detects an open or short in the IES circuit. Possible Sources
- BCM
- Wiring, terminals or connectors
- K1 DIAGNOSE THE CONCERN USING
ENGINE CONTROLS - SYMPTOM CHARTS (EXCEPT DIESEL & HYBRID)
- Diagnose the concern using ENGINE CONTROLS - SYMPTOM CHARTS (EXCEPT DIESEL & HYBRID) pinpoint test.
Did the diagnosis in ENGINE CONTROLS - SYMPTOM CHARTS (EXCEPT DIESEL & HYBRID) instruct to install a new BCM '
Yes REFER to: Body Control Module (BCM)
.No The concern was resolved using ENGINE CONTROLS - SYMPTOM CHARTS (EXCEPT DIESEL & HYBRID) pinpoint test.