Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2023 >> Escape ST-Line Select >> Repair and Diagnosis >> External Pages >> Different car >> Section 1563 (Brake System - General Information) >> General Procedures >> Brake Disc Machining >> Brake System - General Information

Brake System - General Information

WARNING: This page is about a different car, the 2023 Lincoln Nautilus. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: On-Vehicle Brake Lathe Training Videos 
  1. Vehicle preparation.

    Click here to view a video version of this procedure.

    multimedia:A supplement to the article is available.
  2. Mounting the machine.

    Click here to view a video version of this procedure.

    multimedia:A supplement to the article is available.
  3. Lateral runout adjustment.

    Click here to view a video version of this procedure.

    multimedia:A supplement to the article is available.
  4. Making the cut.

    Click here to view a video version of this procedure.

    multimedia:A supplement to the article is available.
  5. Cutting the opposite side.

    Click here to view a video version of this procedure.

    multimedia:A supplement to the article is available.
  6. Lathe maintenance.

    Click here to view a video version of this procedure.

    multimedia:A supplement to the article is available.
scientia non olet · About Mike's Workshop Manuals