Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2023 >> Escape ST-Line Select >> Repair and Diagnosis >> External Pages >> Different car >> Section 1291 (Anti-Lock Brake System (Abs) And Stability Control) >> Removal And Installation >> Hydraulic Control Unit (HCU) >> Installation

Hydraulic Control Unit (HCU): Installation

WARNING: This page is about a different car, the 2022 Ford Bronco Sport. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
  2. Using a diagnostic scan tool, complete the PMI process for the ABS module following the on-screen instructions.
  3. Bleed the brake system. Refer to: Brake System Pressure Bleeding - Vehicles With: Vacuum Brake Booster .
  4. Carry out the following service functions using the scan tool and following the diagnostic scan tool on-screen instructions.

    1. Carry out the ABS Calibration.
    2. Carry out the HCU Coil Solenoid Calibration
    3. Run the PCMPATS programming application and then carry out the Module Initialization (Parameter Reset) using the scan tool and following the diagnostic scan tool on-screen instructions.

scientia non olet · About Mike's Workshop Manuals