Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2023 >> Escape ST-Line Select >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System (Abs) And Stability Control >> Diagnosis And Testing >> Anti-Lock Brake System (ABS) and Stability Control >> Pinpoint Tests >> Pinpoint Test Ag: The Abs Module Does Not Respond To The Diagnostic Scan Tool

Pinpoint Test Ag: The Abs Module Does Not Respond To The Diagnostic Scan Tool

  1. Normal Operation and Fault Conditions 

    With the ignition ON, the diagnostic scan tool communicates with the ABS module over the HS-CAN2. Communications can be interrupted by a wiring condition such as a short to ground, a short to voltage or an open circuit; module failure may also be a cause of no communication.

    Refer to CONTROLLER AREA NETWORK (CAN) MODULE COMMUNICATIONS NETWORK to diagnose the no communication concern..

    Possible Sources 

    • Fuse
    • Wiring, terminals or connectors
    • EBB unit

  2. Diagnostic steps are not provided for this symptom or DTC. REFER to: Diagnostic Methods .

scientia non olet · About Mike's Workshop Manuals