Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2023 >> Edge ST-Line >> Repair and Diagnosis >> Transmission >> Transfer Case >> Power Transfer Unit - 2.7L ECOBOOST (238KW/324PS) >> Removal And Installation >> Oil Temperature Sensor >> Installation

Oil Temperature Sensor: Installation

  1. Lubricate and inspect the O ring.

    Material: Motorcraft® SAE 75W-85 Premium Synthetic Hypoid Gear Lubricant / XY-75W85-QL (WSS-M2C942-A)

    GFD646053Courtesy of FORD MOTOR COMPANY
  2. To install, reverse the removal procedure.
  3. Fill the PTU. Refer to: Power Transfer Unit Draining and Filling .
scientia non olet · About Mike's Workshop Manuals