Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2022 >> Transit-350 Base, Van Crew Extended, 3.5L Eng VIN G, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Electronic Engine Controls - 3.5L ECOBOOST (235KW/320PS) >> Diagnosis And Testing >> Powertrain Control Module (PCM) >> Pinpoint Tests >> Pinpoint Test I: U0415, U0422, U1012

Pinpoint Test I: U0415, U0422, U1012

  1. Normal Operation and Fault Conditions 

    If the PCM does not receive messages from other modules within a certain time frame the PCM sets a DTC for invalid data.

    DTC Fault Trigger Conditions 

    DTC Description Fault Trigger Condition
    PCM U0415:00 Invalid Data Received from Anti-Lock Brake System (ABS) Control Module "A": No Sub Type Information The PCM sets this DTC when the PCM receives invalid network data from the ABS module.
    PCM U0422:00 Invalid Data Received From Body Control Module: No Sub Type Information The PCM sets this DTC when the PCM receives invalid network data from the BCM.
    PCM U1012:00 Invalid Internal Control Module Monitoring Data Received from Anti-Lock Brake System (ABS) Control Module: No Sub Type Information The PCM sets this DTC when the PCM receives invalid network data from the ABS module.

    Possible Sources 

    • Suspect Module

  2. I1 CHECK FOR DIAGNOSTIC TROUBLE CODES (DTCS) FROM THE MODULE SENDING INVALID DATA

    • Using a diagnostic scan tool, carry out the self-test for the module in question sending the invalid data.

    Are any DTCs present from the module sending the invalid data? 

    Yes  DIAGNOSE the module sending the invalid data. REFER to the appropriate Service Information article.
    No  DIAGNOSE the observable symptom.
scientia non olet · About Mike's Workshop Manuals