Pinpoint Test F: Brake System Fill Not Complete
- Refer to Horn/Cigar Lighter
for schematic and connector information.
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition ABS C1020:00 Brake System Fill Not Complete: No Sub Type Information This DTC is pre-set in a new ABS module and can only be cleared when the brake system has been successfully bleed. CARRY OUT the Brake System Service Bleed. REFER to: Brake System Bleeding . Possible Sources
- Brake system bleed not completed
Diagnostic steps are not provided for this symptom or DTC. REFER to: Diagnostic Methods .