Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2021 >> Transit Connect Titanium, Gas >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> MULTIFUNCTION Electronic Modules >> Diagnosis And Testing >> Body Control Module (BCM) >> Pinpoint Tests >> Pinpoint Test S: U1000:00 >> Notes

Pinpoint Test S: U1000:00: Notes

U1000:00 

Normal Operation and Fault Conditions 

The BCM uses solid state drivers to control the output of several vehicle systems. When an overload occurs on any of these drivers, the BCM disables the output and tracks the number of repetitive faults on each of these circuits. The module compares this number of overloads to three progressive thresholds established for each circuit. At each threshold, DTC U1000:00 sets along with the DTC associated with the affected circuit.

DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
U1000:00 Solid State Driver Protection Activated-Driver Disabled: No Sub Type Information A continuous memory DTC that sets when the BCM disables a circuit due to a repetitive circuit overload and a progressive threshold is met.

Possible Sources 

scientia non olet · About Mike's Workshop Manuals