Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2021 >> Mustang Mach-E Select, AWD >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Electric Motor Systems >> Front Electric Drive Assembly - Base Part 2 >> Removal And Installation >> Inverter System Controller [SOBDMB] >> Installation

Inverter System Controller [SOBDMB]: Installation

  1. To install, reverse the removal procedure.
  2. Fill and bleed the electric drivetrain cooling system. Refer to: Electrified Drivetrain Cooling System Draining, Vacuum Filling and Bleeding .
  3. NOTE: This step is only necessary when installing a new component.

    If the inverter system controller SOBDMB was replaced, upload the information from the diagnostic tool to the inverter system controller SOBDMB using the Programmable Modules Installation routine. Refer to: Module Programming .

scientia non olet · About Mike's Workshop Manuals