Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2021 >> Mustang Mach 1, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 748 (Anti-Lock Brake System (Abs) And Stability Control) >> Removal And Installation >> Front Wheel Speed Sensor >> Installation

Front Wheel Speed Sensor: Installation

WARNING: This page is about a different car, the 2021 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: Before installing a new sensor, inspect the sensor housing to make sure the sensor cavity is clean and free of foreign material or damage to the sensor may occur.

    Clean and inspect the sensor housing cavity.

    Material

    : Motorcraft® Metal Brake Parts Cleaner / PM-4-A, PM-4-B

    GFD586283Courtesy of FORD MOTOR COMPANY
  2. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals