Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2021 >> GT >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Climate Control System - General Information >> Removal And Installation >> Condenser Inlet Line >> Installation

Condenser Inlet Line: Installation

  1. To install, reverse the removal procedure.
  2. NOTE: Only use the specified material to lubricate the seals.

    Install new O-ring seals.

    Material: Motorcraft® R-1234yf Refrigerant PAG Oil / YN-35 (WSS-M2C300-A2)

  3. Add the correct amount of clean PAG oil to the refrigerant system. Refer to: Refrigerant Oil Adding  .
scientia non olet · About Mike's Workshop Manuals