Hydraulic Lash Adjuster
WARNING: This page is about a different variant/trim than selected.
| Item |
Specification |
| Diameter -- intake |
0.4720 -0.4724 in (11.989 -12 mm) |
| Diameter -- exhaust |
0.4720 -0.4724 in (11.989 -12 mm) |
| Clearance-to-bore |
0.0004 -0.0020 in (.01 -.051 mm) |
| Collapsed lash adjuster gap |
0.0138 -0.0335 in (.35 -.85 mm) |