Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2021 >> Edge ST-Line, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 494 (EPAS Guided Routine) >> Pinpoint Tests >> Pinpoint Tests CA: PSCM DTC U0416 Invalid Data Received From Vehicle Dynamics Control Module (VDM) >> DTC Trigger

DTC Trigger

WARNING: This page is about a different car, the 2020 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

The DTC sets when the PSCM receives invalid data from the VDM. The data is likely invalid due to VDM internal errors, damaged or inoperative sensors or components the VDM uses to gather vehicle data. The invalid data DTC is not set due to the PSCM, PSCM wiring or connectors. Consult the DTC index for additional information if needed.

scientia non olet · About Mike's Workshop Manuals