Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2021 >> Edge ST-Line, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 473 (Engine Controls - Pinpoint Tests (Diesel)) >> Pinpoint Tests F: Intake Air Temperature (IAT) Sensor >> Introduction

Pinpoint Tests F: Intake Air Temperature (IAT) Sensor: Introduction

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2019 Ford Transit-350 HD, 2019 Ford Transit-350, 2019 Ford Transit-250, 2019 Ford Transit-150, and 2019 Ford F-550 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Regeneration may occur during normal operation. During regeneration, diagnostic procedures may display biased values. If a regeneration occurs during diagnostic procedures, allow the process to complete before continuing diagnostics.

This pinpoint test is intended to diagnose the following:

Harness Side

Circuit Pin
IAT (Intake Air Temperature) 2
SIGRTN (Signal Return) 4

Harness Side

Circuit Pin
IAT (Intake Air Temperature) 47
SIGRTN (Signal Return) 60

Harness Side

Circuit Pin