Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2021 >> Edge ST-Line, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Anti-Lock Brake System (Abs) And Stability Control) >> Removal And Installation >> Hydraulic Control Unit (HCU) >> Installation

Hydraulic Control Unit (HCU): Installation

WARNING: This page is about a different car, the 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, 2018 Ford F-350 Super Duty, and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
    • Using a diagnostic scan tool, complete the PMI process for the ABS module following the on-screen instructions.

    • Carry out the IVD initialization using the scan tool and following the diagnostic scan tool on-screen instructions.

  3. Bleed the brake system. Refer to: Brake System Pressure Bleeding .
scientia non olet · About Mike's Workshop Manuals