Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2021 >> Edge ST-Line, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Powertrain DTC Charts & Descriptions (Except Diesel & Hybrid) >> Diagnostic Trouble Code (DTC) Charts And Descriptions >> P264F - Engine Serial Number Not Programmed Or Incompatible

P264F - Engine Serial Number Not Programmed Or Incompatible

DTC DESCRIPTION P264F - ENGINE SERIAL NUMBER NOT PROGRAMMED OR INCOMPATIBLE

Description:  This DTC sets when the PCM does not receive a valid engine serial number during reprogramming.
Possible Causes: 
  • Engine serial number corrupted during vehicle identification (VID) reprogramming
  • PCM replacement
Diagnostic Aids:  The VID block must be programmed. Refer to Flash Electrically Erasable Programmable Read Only Memory (EEPROM), Programming VID Block. If the PCM does not allow reprogramming of the VID block, reflashing of the PCM is required. 
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to PINPOINT TEST QA .
scientia non olet · About Mike's Workshop Manuals