P064F - Unauthorized Software/Calibration Detected
DTC DESCRIPTION P064F - UNAUTHORIZED SOFTWARE/CALIBRATION DETECTED
| Description: | This DTC sets when the PCM has detected an unauthorized calibration. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Reprogram or update the calibration. Reprogram the vehicle identification (VID) block (use as built data). Check for other DTCs or drive symptoms for further action. Check for aftermarket performance products. If it is necessary to install a new PCM, refer to Flash Electrically Erasable Programmable Read Only Memory (EEPROM). | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test QA. | ||