Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2021 >> Bronco Sport Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System (Abs) And Stability Control >> Removal And Installation >> Hydraulic Control Unit (HCU) >> Installation

Hydraulic Control Unit (HCU): Installation

  1. To install, reverse the removal procedure.
  2. Using a diagnostic scan tool, complete the PMI process for the ABS module following the on-screen instructions.
  3. Carry out the ABS Calibration, the HCU Coil Solenoid Calibration and the Brake System Pressure Bleeding service functions using the scan tool and following the diagnostic scan tool on-screen instructions.
scientia non olet · About Mike's Workshop Manuals