Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2021 >> Bronco First Edition, 2D Utility >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System (Abs) And Stability Control >> Removal And Installation >> Hydraulic Control Unit (HCU) >> Installation

Hydraulic Control Unit (HCU): Installation

  1. To install, reverse the removal procedure.
  2. Using a diagnostic scan tool, complete the PMI process for the ABS module following the on-screen instructions.
  3. Bleed the brake system. Refer to: Brake System Pressure Bleeding - Vehicles With: Vacuum Brake Booster .
  4. Carry out the ABS Calibration and the HCU Solenoid Calibration service functions following the diagnostic scan tool on-screen instructions.
scientia non olet · About Mike's Workshop Manuals