Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2020 >> Escape Titanium Plug-In Hybrid >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Powertrain DTC Charts & Descriptions (Hybrid) >> Diagnostic Trouble Code (DTC) Charts And Descriptions >> DTC P1A0C (SOBDMC) - Hybrid Powertrain Control Module - Engine Disabled

DTC P1A0C (SOBDMC) - Hybrid Powertrain Control Module - Engine Disabled

DTC DESCRIPTION P1A0C (SOBDMC) - HYBRID POWERTRAIN CONTROL MODULE AND ENGINE DISABLED

Description:  This DTC sets when the PCM indicates an engine fault or the engine does not start within a calibrated maximum time.
Possible Causes: 
  • Damaged engine
  • Engine oil over the maximum fluid level
  • Automatic transmission fluid over the maximum fluid level
Diagnostic Aids:  Diagnose and repair any PCM DTCs first. This DTC will set in conjunction with the PCM DTC P1A0C.
Under certain circumstances, excessive engine oil or automatic transmission fluid levels can cause the engine to stall. Verify the engine oil and automatic transmission fluid levels are correct.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to PINPOINT TEST QE .
scientia non olet · About Mike's Workshop Manuals