DTC P0C64 - Generator Position Sensor Circuit A
DTC DESCRIPTION P0C64 - GENERATOR POSITION SENSOR CIRCUIT A
| Description:
This DTC sets when a generator concern is present. |
Possible Causes:
- GR1 or GR2 circuit open
- GS1 or GS2 circuit open
- GC1 or GC2 circuit open
- GR1 or GR2 circuit short to ground
- GS1 or GS2 circuit short to ground
- GC1 or GC2 circuit short to ground
- GR1 or GR2 circuit short to voltage
- GS1 or GS2 circuit short to voltage
- GC1 or GC2 circuit short to voltage
- Incorrect generator resolver voltage supply from the TCM
- Incorrect generator current feedback in the TCM
|
| Diagnostic Aids: |
| Application |
Key On Engine Off |
Key On Engine Running |
Continuous Memory |
| All |
GO to PINPOINT TEST TX
. |