DTC P0A6F - Generator Phase U Current
DTC DESCRIPTION P0A6F - GENERATOR PHASE U CURRENT
| Description: This DTC sets when the TCM detects a generator U phase current sensor offset. | |||
Possible Causes:
|
|||
| Diagnostic Aids: Clear the SOBDMC DTCs. Repeat the self-test. If the DTC is retrieved again, install a new TCM. Refer to the Automatic Transmission article. Refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) , Programming the TRID Block for a Replacement TCM. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to the Description, Possible Causes and Diagnostic Aids for the DTC. | ||