DTC P0460 - Fuel Level Sensor A Circuit

DTC DESCRIPTION P0460 - FUEL LEVEL SENSOR A CIRCUIT

Description: This DTC sets when the PCM calculates the amount of fuel used during operation does not change or does not correspond with the calculated fuel usage.
Possible Causes: Stuck float arm Fuel level is always greater than 95% due to refueling patterns Fuel level is always less than 5% due to refueling patterns Fuel level is always at the same level between 3% and 97% full due to refueling patterns Fuel pump (FP) module concern Damaged instrument panel cluster (IPC)
Diagnostic Aids: Check with the customer for driving and fueling habits that would keep the fuel level at approximately the same value. Monitor the FLI PID while attempting to move the fuel level float by adding or removing fuel as necessary.
Application	Key On Engine Off	Key On Engine Running	Continuous Memory
All	GO to PINPOINT TEST HX .