Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2020 >> Edge ST-Line, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (MULTIFUNCTION Electronic Modules) >> Diagnosis And Testing >> Body Control Module B (BCMB) >> Pinpoint Tests >> Pinpoint Test C : U3003:62 >> Notes

Pinpoint Test C : U3003:62: Notes

WARNING: This page is about a different car, the 2020 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.

Vehicle Ground Information 

Refer to OEM GROUND DISTRIBUTION

Vehicle Power Information 

Refer to OEM WIRING DIAGRAMS FOR POWER DISTRIBUTION

Normal Operation and Fault Conditions 

The BCMB receives hot at all times voltage from the BJB.

DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
U3003:62 Battery Voltage: Signal Compare Failure A continuous memory DTC that sets in the BCMB when the BCMB detects battery voltage 1.5 volts above or below specific thresholds.

Possible Sources 

scientia non olet · About Mike's Workshop Manuals