Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2020 >> Edge ST-Line, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 164 (Supplemental Restraint System - General Procedures, Removal And Installation) >> Removal And Installation >> Front Impact Severity Sensor >> Installation

Front Impact Severity Sensor: Installation

WARNING: This page is about a different car, the 2020 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: The front impact severity sensor mating surfaces must be smooth and allow for a flush attachment to each other.

    To install, reverse the removal procedure.

  2. Repower the SRS. Refer to: Supplemental Restraint System (SRS) Repowering .
scientia non olet · About Mike's Workshop Manuals