Powertrain Control Module (PCM): Removal

NOTE: Removal steps in this procedure may contain installation details.

NOTE: This step is only necessary when installing a new component.

Download the module information to the diagnostic tool using the Programmable Modules Installation routine. Refer to: Module Configuration - System Operation and Component Description .
Remove the degas bottle retainers and position the degas bottle aside.
Torque

: 71 lb.in (8 Nm)

Courtesy of FORD MOTOR COMPANY
- Disconnect the PCM electrical connectors.
- Remove the mounting bolts and the PCM.
  Torque
  
  : 97 lb.in (11 Nm)

Courtesy of FORD MOTOR COMPANY