Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2019 >> Flex SE >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Electronic Engine Controls >> Removal And Installation >> Manifold Absolute Pressure and Temperature (MAPT) Sensor - 3. 5L Ti-VCT

Manifold Absolute Pressure and Temperature (MAPT) Sensor - 3. 5L Ti-VCT

For information on Ford Color Coded Illustrations refer to OEM Color Coding .

Material

Item Specification
Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil (US); Motorcraft® SAE 5W-20 Super Premium Motor Oil (Canada)XO-5W20-QSP (US); CXO-5W20-LSP12 (Canada) WSS-M2C945-A
  1. Disconnect the MAPT sensor electrical connector.
    GFD321073Courtesy of FORD MOTOR COMPANY
  2. Remove the bolt and the MAPT sensor.

    • To Install, tighten to 4 Nm (35 Ib-In).

    GFD321074Courtesy of FORD MOTOR COMPANY
  3. To Install, reverse the removal procedure.

    • Lubricate the MAPT sensor O-ring seal with clean engine oil.

scientia non olet · About Mike's Workshop Manuals