Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2019 >> Fiesta ST Line, Automatic DCT Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System (Abs) And Stability Control >> Diagnosis And Testing >> Anti-Lock Brake System (ABS) and Stability Control >> Pinpoint Test(s) >> Pinpoint Test F : U3003:17 >> Notes

Pinpoint Test F : U3003:17: Notes

Normal Operation and Fault Conditions 

The ABS module, hydraulic pump and solenoid valves require an operating voltage between 10 and 17 volts. The ABS module receives this voltage from the BJB and the CJB. The ABS module has a single ground circuit located in the engine compartment wiring harness. An overcharging condition in the charging system results in the ABS module setting a DTC. This DTC may also set in the ABS module due to battery charging or vehicle jump starting events.

DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
U3003:17 Battery Voltage: Circuit Voltage Above Threshold This DTC sets in continuous memory and on-demand if the voltage supplied to the ABS module is above 17 volts.

Possible Sources 

scientia non olet · About Mike's Workshop Manuals