Stability Assist Traction Control Switch: Removal

NOTE: Removal steps in this procedure may contain installation details.

1. Remove the FCIM. For Vehicles Without: SYNC, Refer to: Front Controls Interface Module (FCIM) . For Vehicles With: SYNC Without Touchscreen, Refer to: Front Controls Interface Module (FCIM) . For Vehicles With: Touchscreen Display, Refer to: Front Controls Interface Module (FCIM) . For Vehicles With: Bang and Olufsen Audio System, Refer to: Front Controls Interface Module (FCIM) .
2. Press the 2 tabs and remove the stability assist/traction control switch.

Courtesy of FORD MOTOR COMPANY