| P0562 |
System Voltage Low |
GO to Pinpoint Test B |
| P0563 |
System Voltage High |
GO to Pinpoint Test A |
| P065B |
Generator Control Circuit Range/Performance |
GO to Pinpoint Test B |
| P065C |
Generator Mechanical Performance |
GO to Pinpoint Test C |
| P0A3B |
Generator Over Temperature |
CARRY OUT self-test of the PCMand DIAGNOSE any grille shutter or cooling fan Diagnostic Trouble Codes (DTCs). If no grille shutter or cooling fan Diagnostic Trouble Codes (DTCs) are present, INSTALL a new generator. REFER to: Generator - 2.5L Duratec (125kW/170PS)
. |
| P1397 |
System Voltage Out Of Self Test Range |
If combined with P0562, GO to Pinpoint Test B
If combined with P0563, GO to Pinpoint Test A |
| U012D |
Lost Communication With Generator Control Module |
GO to Pinpoint Test G |
| U042E |
Invalid Data Received From Generator Control Module |
GO to Pinpoint Test G |
| All Other DTCs |
- |
REFER to: Electronic Engine Controls
. |