Ignition Coil-On-Plug: Removal

Both sides 

1. Remove the engine appearance cover retainers and then remove the engine appearance cover.

   Courtesy of FORD MOTOR COMPANY

   Left side 

2. Disconnect the quick release couplings. Refer to: QUICK RELEASE COUPLING

   Courtesy of FORD MOTOR COMPANY

3. Release the electrical harness retainers from the ignition coil-on-plug studbolts. Disconnect the ignition coil-on-plug electrical connectors.

   Courtesy of FORD MOTOR COMPANY

4. NOTE: Use compressed air to remove any foreign material from the ignition coil-on-plugs and surrounding area before removing the ignition coil-on-plugs.
   NOTE: When removing the ignition coil-on-plugs, a slight twisting motion will break the seal and ease removal.

   Remove the ignition coil-on-plug retaining studbolts, then remove the ignition coil-on-plugs.

   Courtesy of FORD MOTOR COMPANY

   Right side 

5. Disconnect the quick release couplings and then remove the crankcase ventilation hose. Refer to: QUICK RELEASE COUPLING

   Courtesy of FORD MOTOR COMPANY

6. Remove the air cleaner outlet pipe RH. Refer to: Air Cleaner Outlet Pipe RH .
7. Detach the wire harness retainers from the studbolts.

   Courtesy of FORD MOTOR COMPANY

8. Disconnect the ignition coil-on-plug electrical connectors.

   Courtesy of FORD MOTOR COMPANY

9. NOTE: Use compressed air to remove any foreign material from the ignition coil-on-plugs and surrounding area before removing the ignition coil-on-plugs.
   NOTE: When removing the ignition coil-on-plugs, a slight twisting motion will break the seal and ease removal.

   Remove the ignition coil-on-plug retaining studbolts, then remove the ignition coil-on-plugs.

Courtesy of FORD MOTOR COMPANY