Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2019 >> Edge ST >> Repair and Diagnosis >> Brakes >> Brakes Control Systems >> Abs Guided Routine >> Pinpoint Tests >> Pinpoint Tests BL: SASM Ignition Input Circuit Fault >> Normal Operation and Fault Conditions

Normal Operation and Fault Conditions

The SASM requires an operating voltage between 8 and 17 volts. The SASM receives fused ignition voltage from the BCM run-start bus. The SASM sets this DTC if there is excessive resistance or an open in this circuit, including an open fuse. 

DTC DESCRIPTION

DTC Description Fault Trigger Conditions
U3011:13 Ignition Input Off: Circuit Open This DTC sets if the ignition voltage supplied to the SASM is below 6 volts for more than one second.
scientia non olet · About Mike's Workshop Manuals