Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2018 >> Fusion Sport >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Engine Controls - Fuel Charging And Controls - 2.7L ECOBOOST (238KW/324PS) >> Removal And Installation >> Fuel Pump Driver Module (FPDM) >> Removal

Fuel Pump Driver Module (FPDM): Removal

NOTE: The fuel pump driver module is located behind the left C-pillar lower trim panel.
  1. Remove the left C-pillar lower trim panel. Refer to: C-Pillar Lower Trim Panel .
    • Disconnect the fuel pump driver module electrical connector.
    • Remove the fuel pump driver module retaining nuts, then remove the fuel pump driver module.
    GFD193431Courtesy of FORD MOTOR COMPANY