Removal And Installation
WARNING: This page is about a different car, the 2016 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
- 1.
Release and remove the tray from the RH rear quarter trim panel.
 Courtesy of FORD MOTOR COMPANY
|
- 2.
Remove the seat control switch.
- Release the 2 retaining tabs and detach the seat control switch from the RH rear quarter trim panel.
- Disconnect the electrical connector.
 Courtesy of FORD MOTOR COMPANY
|
- 3.
To install, reverse the removal procedure.