Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2017 >> Transit Connect Titanium >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Automatic Transmission - 6F35) >> Disassembly And Assembly Of Subassemblies >> Transmission Case >> Disassembly

Transmission Case: Disassembly

WARNING: This page is about a different car, the 2016 Ford Transit Connect. However, it is still accessible from the selected car via links, so may be relevant.

  1. 1.

    NOTE: The transmission case bushing should only be removed if the bushing is damaged.
    NOTE: Press the bushing out of the transmission case from the outside to the inside so the transmission case rests on a flat surface.

    If necessary, use the special tools to remove and discard the LH transmission case bushing from the transmission case. Use Special Service Tool: 206-084 Installer, Wheel Speed Sensor Ring. Use the General Equipment: Hydraulic Press

GFD150224Courtesy of FORD MOTOR COMPANY

  1. 2.

    Remove the differential ring gear snap ring.
GFD150225Courtesy of FORD MOTOR COMPANY

  1. 3.

    Remove the differential ring gear.
GFD150226Courtesy of FORD MOTOR COMPANY
scientia non olet · About Mike's Workshop Manuals