Pinpoint Test D : P0A14: Notes
Refer to Electronic Engine Controls - 2.3L for schematic and connector information.
DTC Fault Trigger Condition-PCM
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| P0A14 | Engine Mount Control "A" Circuit/Open | The PCM sets this DTC if it senses greater than expected voltage on the control circuit, indicating a short to voltage or an open circuit or solenoid. |
Normal Operation and Fault Conditions
The engine mound control solenoid allows vacuum to be applied to the engine mounts at idle. If the system malfunctions a rougher than expected idle will occur.
Possible Sources
- Wiring, terminals or connectors
- Engine mount control solenoid
- PCM
Visual Inspection and Diagnostic Pre-checks
- Inspect the Engine mount control solenoid for loose or corroded connections.
- Verify BJB fuse 42 (15A).