Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2017 >> Mustang EcoBoost, Automatic Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System (Abs) And Stability Control >> Removal And Installation >> Hydraulic Control Unit (HCU) >> Installation

Hydraulic Control Unit (HCU): Installation

  1. 1.

    To install, reverse the removal procedure.

  1. 2.

    Bleed the brake system. Refer to: Brake System Pressure Bleeding .

  1. 3.

    If a new HCU is being installed, carryout the IVD Initialization Sequence and Valve Calibration using the scan tool and following the scan tool on-screen instructions.
scientia non olet · About Mike's Workshop Manuals