Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2017 >> GT >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System (Abs) And Stability Control >> Diagnosis And Testing >> Anti-Lock Brake System (ABS) and Stability Control >> Symptom Chart >> Symptom Chart: Anti-Lock Brake System (ABS) and Stability Control

Symptom Chart: Anti-Lock Brake System (ABS) and Stability Control

Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .

Condition Possible Sources Actions
A module does not respond to the diagnostic scan tool Fuse
Wiring, terminals or connectors
ABS module concern
REFER to: Communications Network .
The brake warning indicator is always or never on Low brake fluid level
Brake fluid level sensor
Parking brake applied
Parking brake switch
IPC concern
ABS concern
RETRIEVE and DIAGNOSE all ABS module Diagnostic Trouble Codes (DTCs). If there are no ABS module Diagnostic Trouble Codes (DTCs), DIAGNOSE the brake warning indicator. REFER to: Instrumentation, Message Center and Warning Chimes .
The ABS warning indicator is always or never on IPC concern
ABS concern
RETRIEVE and DIAGNOSE all ABS module Diagnostic Trouble Codes (DTCs). If there are no ABS module Diagnostic Trouble Codes (DTCs), DIAGNOSE the ABS warning indicator. REFER to: Instrumentation, Message Center and Warning Chimes .
The stability-traction control OFF indicator (sliding-car OFF icon) is always on IPC concern
ABS concern
RETRIEVE and DIAGNOSE all ABS module Diagnostic Trouble Codes (DTCs). If there are no ABS module Diagnostic Trouble Codes (DTCs), DIAGNOSE the stability-traction control OFF indicator. REFER to: Instrumentation, Message Center and Warning Chimes .
ABS false activation, ABS too sensitive, ABS activates on normal stop Refer to the Pinpoint Test GO to Pinpoint Test S 
The brake vacuum pump runs all the time Refer to the Pinpoint Test GO to Pinpoint Test T 
The brake vacuum pump never runs Refer to the Pinpoint Test GO to Pinpoint Test T 
The traction control system is inoperative or cannot be disabled Refer to the Pinpoint Test GO to Pinpoint Test J 
The launch control system is inoperative Refer to the Pinpoint Test GO to Pinpoint Test R 
The message center displays Launch Control Not Available Refer to the Pinpoint Test GO to Pinpoint Test R