P0452 - EVAP System Pressure Sensor/Switch Low
P0452 - EVAP SYSTEM PRESSURE SENSOR/SWITCH LOW
| Description: | This DTC sets when the FTP signal average is less than a minimum allowable calibrated parameter. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | An FTP PID reading less than 0.25 volts with the ignition ON, engine OFF or ignition ON, engine running indicates a concern is present. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test HX . | ||