Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2017 >> Focus ST >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 97 (Climate Control System - General Information (Electric Vehicle)) >> Removal And Installation >> Receiver Drier >> Installation

Receiver Drier: Installation

WARNING: This page is about a different variant/trim than selected.

  1. 1.

    To install, reverse the removal procedure.

  1. 2.

    NOTE: Only use the specified material to lubricate the seals.

    Install new O-ring seals.

    Material: Motorcraft® R-1234yf Refrigerant POE Oil / YN-34 (WSS-M2C31-B2)

  1. 3.

    Add the correct amount of clean Polyolester (POE) oil to the refrigerant system. Refer to: Refrigerant Oil Adding .
scientia non olet · About Mike's Workshop Manuals