Mike's Workshop Manuals
: Service manuals for every vehicle
Home
>>
Ford
>>
2017
>>
Edge SE, AWD
>>
Repair and Diagnosis
>>
External Pages
>>
Different variant/trim
>>
Section 22 (Engine Controls - Fuel Charging And Controls - 2.7L ECOBOOST (238KW/324PS))
>>
Removal And Installation
>>
Fuel Pump Driver Module (FPDM)
>>
Installation
Fuel Pump Driver Module (FPDM): Installation
WARNING:
This page is about a different variant/trim than selected.
1.
Install the FPDM, then install and tighten the FPDM nuts.
Torque: 13 lb.in (1.5 Nm)
Courtesy of FORD MOTOR COMPANY
2.
Connect the FPDM electrical connector.
Courtesy of FORD MOTOR COMPANY