Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2017 >> Edge SE, AWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seating System - Rear >> Removal And Installation >> Power Fold Seat Control Switch >> Removal

Power Fold Seat Control Switch: Removal

  1. 1.

    Using an interior trim tool, release the power fold seat control switch locking tabs.

    Use the General Equipment: Interior Trim Remover

GFD17907Courtesy of FORD MOTOR COMPANY

  1. 2.

    Disconnect the electrical connector and remove the power fold seat control switch.
GFD17908Courtesy of FORD MOTOR COMPANY
scientia non olet · About Mike's Workshop Manuals