Pinpoint Test E : U0104: Notes
Refer to MODULE COMMUNICATIONS NETWORK for schematic and connector information.
Refer to CRUISE CONTROL for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Cruise Control - System Operation and Component Description .
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0104 | Lost Communication With Cruise Control Module | Sets in the PCM if data messages received from the CCM over the HS-CAN2 or from the GWM over the HS-CAN1 are missing for greater than 5 seconds. |
Possible Sources
- CCM
- PCM
- GWM