Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2016 >> Transit-150 Base, 3.2L Eng VIN V >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Diagnostic Methods (Diesel) >> Drive Cycles >> Exhaust Fluid System Fault Procedure >> Exhaust Fluid System Fault Procedure - Transit

Exhaust Fluid System Fault Procedure - Transit

NOTE: Verify that no DTCs are present and one of the Exhaust Fluid System Fault messages or the DEF System Fault message is present in the instrument cluster message center before carrying out the procedure.
  1. Access the PCM and monitor the EGT13 and RPM PIDs.
  2. Increase the engine RPM to 2000 to 2500 RPM using the accelerator pedal. With the engine RPM elevated, monitor the EGT13 PID until the value is greater than 155 °C (311 °F) and the message in the message center has cleared.
scientia non olet · About Mike's Workshop Manuals