P264F - Engine Serial Number Not Programmed
DTC DESCRIPTION P264F - ENGINE SERIAL NUMBER NOT PROGRAMMED
| Description: | This DTC sets when the PCM does not receive a valid engine serial number during reprogramming. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | The VID block must be programmed. Refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) , Programming VID Block. If the PCM does not allow reprogramming of the VID block, reflashing of the PCM is required. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to the Description, Possible Causes and Diagnostic Aids for the DTC. | ||