Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2016 >> Fusion Titanium, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Engine Control System) >> Manifold Absolute Pressure Sensor (MAPS) >> Repair procedures >> Removal

Repair procedures: Removal

WARNING: This page is about a different car, the 2014 Hyundai Elantra GT and 2013 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the manifold absolute pressure sensor connector (A).
  3. Remove the installation bolt (B), and then remove the sensor from the surge tank.
    Fig 1: Identifying Manifold Absolute Pressure Sensor Connector And Bolt
    G09885890Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals